Stabilization of an infectious enveloped virus by spray-drying and lyophilization.

Enveloped viruses are attractive candidates for use as gene- and immunotherapeutic agents due to their efficacy at infecting host cells and delivering genetic information. They have also been used in vaccines as potent antigens to generate strong immune responses, often requiring fewer doses than other vaccine platforms as well as eliminating the need for adjuvants. However, virus instability in liquid formulations may limit their shelf life and require that these products be transported and stored under stringently controlled temperature conditions, contributing to high cost and limiting patient access. In this work, spray-drying and lyophilization were used to embed an infectious enveloped virus within dry, glassy polysaccharide matrices. No loss of viral titer was observed following either spray-drying (at multiple drying gas temperatures) or lyophilization. Furthermore, viruses embedded in the glassy formulations showed enhanced thermal stability, retaining infectivity after exposure to elevated temperatures as high as 85°C for up to one hour, and for up to 10 weeks at temperatures as high as 30°C. In comparison, viruses in liquid formulations lost infectivity within an hour at temperatures above 40°C, or after incubation at 25°C for longer periods of time.

Combinatorial High-Throughput Screening of Complex Polymeric Enzyme Immobilization Supports.

Recent advances have demonstrated the promise of complex multicomponent polymeric supports to enable supra-biological enzyme performance. However, the discovery of such supports has been limited by time-consuming, low-throughput synthesis and screening. Here, we describe a novel combinatorial and high-throughput platform that enables rapid screening of complex and heterogeneous copolymer brushes as enzyme immobilization supports, named combinatorial high-throughput enzyme support screening (CHESS). Using a 384-well plate format, we synthesized arrays of three-component polymer brushes in the microwells using photoactivated surface-initiated polymerization and immobilized enzymes in situ. The utility of CHESS to identify optimal immobilization supports under thermally and chemically denaturing conditions was demonstrated usingBacillus subtilisLipase A (LipA). The identification of supports with optimal compositions was validated by immobilizing LipA on polymer-brush-modified biocatalyst particles. We further demonstrated that CHESS could be used to predict the optimal composition of polymer brushes a priori for the previously unexplored enzyme, alkaline phosphatase (AlkP). Our findings demonstrate that CHESS represents a predictable and reliable platform for dramatically accelerating the search of chemical compositions for immobilization supports and further facilitates the discovery of biocompatible and stabilizing materials.

Supra-biological performance of immobilized enzymes enabled by chaperone-like specific non-covalent interactions.

Designing complex synthetic materials for enzyme immobilization could unlock the utility of biocatalysis in extreme environments. Inspired by biology, we investigate the use of random copolymer brushes as dynamic immobilization supports that enable supra-biological catalytic performance of immobilized enzymes. This is demonstrated by immobilizing Bacillus subtilis Lipase A on brushes doped with aromatic moieties, which can interact with the lipase through multiple non-covalent interactions. Incorporation of aromatic groups leads to a 50 °C increase in the optimal temperature of lipase, as well as a 50-fold enhancement in enzyme activity. Single-molecule FRET studies reveal that these supports act as biomimetic chaperones by promoting enzyme refolding and stabilizing the enzyme's folded and catalytically active state. This effect is diminished when aromatic residues are mutated out, suggesting the importance of π-stacking and π-cation interactions for stabilization. Our results underscore how unexplored enzyme-support interactions may enable uncharted opportunities for using enzymes in industrial biotransformations.

Tuning Polymer Composition Leads to Activity-Stability Tradeoff in Enzyme-Polymer Conjugates.

Protein-polymer conjugation provides an opportune means to adjust the local environment of proteins and enhance protein stability, performance, and solubility. Although much attention has been focused on tuning protein-polymer interactions, the properties of polymer-modified proteins may also be altered by polymer-polymer interactions. Herein, we sought to better understand the influence of polymer-polymer interactions on Candida rugosa lipase, which was modified with random co-polymers composed of sulfobetaine methacrylate (SBMA) and poly(ethylene glycol) methacrylate (PEGMA). Our findings suggest that there is an apparent activity-stability tradeoff as a function of polymer composition. Specifically, as the ratio of SBMA to PEGMA increased, lipase stability was enhanced, whereas activity decreased. By tuning the monomer ratio, we showed that lipase productivity could be optimized. These findings are discussed in the context of complex enzyme-polymer and polymer-polymer interactions and ultimately may enable more informed conjugate designs and improved enzyme productivity in industrial biotransformations under harsh or extreme conditions.

Tuning the surface charge of phospholipid bilayers inhibits insulin fibrilization.

The interactions between proteins and materials, in particular lipid bilayers, have been studied extensively for their relevance in diseases and for the formulation of protein-based therapeutics and vaccines. However, the precise rules by which material properties induce favorable or unfavorable structural states in biomolecules are incompletely understood, and as a result, the rational design of materials remains challenging. Here, we investigated the influence of lipid bilayers (in the form of small unilamellar vesicles) on the formation of insulin amyloid fibrils using a fibril-specific assay (thioflavin T), polyacrylamide gel electrophoresis, and circular dichroism spectroscopy. Lipid bilayers composed of equal mixtures of cationic and anionic lipids effectively inhibited fibril formation and stabilized insulin in its native conformation. However, other lipid bilayer compositions failed to inhibit fibril formation or even destabilized insulin, exacerbating fibrilization and/or non-amyloid aggregation. Our findings suggest that electrostatic interactions with lipid bilayers can play a critical role in stabilizing or destabilizing insulin, and preventing the conversion of insulin to its amyloidogenic, disease-associated state.

Biocatalytic 3D Actuation in Liquid Crystal Elastomers via Enzyme Patterning.

Liquid crystal elastomers (LCEs) are stimuli-responsive materials that undergo large shape transformations after undergoing an order-disorder transition. While shape reconfigurations in LCEs are predominantly triggered by heat, there is a considerable interest in developing highly specific triggers that work at room temperature. Herein, we report the fabrication of biocatalytic LCEs that respond to the presence of urea by covalently immobilizing urease within chemically responsive LCE networks. The hydrogen-bonded LCEs developed in this work exhibited contractile strains of up to 36% upon exposure to a base. Notably, the generation of ammonia by immobilized urease triggered a disruption in the supramolecular network and a large reduction of liquid crystalline order in the films when the LCEs were exposed to urea. This reduction in order was macroscopically translated into a strain response that could be modulated by changing the concentration of urea or exposure time to the substrate. Local control of the mechanical response of the LCE was realized by spatially patterning the enzyme on the surface of the films. Subsequent exposure of enzymatically patterned LCE to urea-triggered 3D shape transformations into a curl, arch, or accordion-like structure, depending on the motif patterned on the film surface. Furthermore, we showed that the presence of salt was critical to prevent bridging of the network by the presence of ammonium ions, thereby enabling such macroscopic 3D shape changes. The large actuation potential of LCEs and the ability to translate the biocatalytic activity of enzymes to macroscopic 3D shape transformations could enable use in applications ranging from cell culture, medicine, or antifouling.

Quantification of Metabolic Products from Microbial Hosts in Complex Media Using Optically Diffracting Hydrogels.

We herein describe a highly versatile platform approach for the in situ and real-time screening of microbial biocatalysts for enhanced production of bioproducts using photonic crystal hydrogels. This approach was demonstrated by preparing optically diffracting films based on polymerized N-isopropylacrylamide that contracted in the presence of alcohols and organic acids. The hydrogel films were prepared in a microwell plate format, which allows for high-throughput screening, and characterized optically using a microwell plate reader. While demonstrating the ability to detect a broad range of relevant alcohols and organic acids, we showed that the response of the films correlated strongly with the octanol-water partition coefficient (log P) of the analyte. Differences in the secretion of ethanol and succinic acid from strains of Zymomonas mobilis and Actinobacillus succinogenes, respectively, were further detected via optical characterization of the films. These differences, which in some cases were as low as ∼3 g/L, were confirmed by high-performance liquid chromatography, thereby demonstrating the sensitivity of this approach. Our findings highlight the potential utility of this multiplexed approach for the detection of small organic analytes in complex biological media, which overcomes a major challenge in conventional optical sensing methods.

Substitution of distal and active site residues reduces product inhibition of E1 from Acidothermus Cellulolyticus.

Cellulases are largely afflicted by inhibition from their reaction products, especially at high-substrate loading, which represents a major challenge for biomass processing. This challenge was overcome for endoglucanase 1 (E1) from Acidothermus cellulolyticus by identifying a large conformational change involving distal residues upon binding cellobiose. Having introduced alanine substitutions at each of these residues, we identified several mutations that reduced cellobiose inhibition of E1, including W212A, W213A, Q247A, W249A and F250A. One of the mutations (W212A) resulted in a 47-fold decrease in binding affinity of cellobiose as well as a 5-fold increase in the kcat. The mutation further increased E1 activity on Avicel and dilute-acid treated corn stover and enhanced its productivity at high-substrate loadings. These findings were corroborated by funnel metadynamics, which showed that the W212A substitution led to reduced affinity for cellobiose in the +1 and +2 binding sites due to rearrangement of key cellobiose-binding residues.

Chemically Triggered Changes in Mechanical Properties of Responsive Liquid Crystal Polymer Networks with Immobilized Urease.

Liquid crystal polymer networks (LCNs) are stimuli-responsive materials that can be programmed to realize spatial variation in mechanical response and undergo shape transformation. Herein, we report a process to introduce chemical specificity to the stimuli response of LCNs by integrating enzymes as molecular triggers. Specifically, the enzyme urease was immobilized in LCN films via acyl fluoride conjugation chemistry. Activity assays and confocal fluorescence imaging confirmed retention of urease activity after immobilization as well as widespread distribution of enzyme on the film. The addition of urea triggered a response in the LCN whereby newly generated ammonia reacted with free acyl fluorides to form benzamide moieties. These moieties were capable of dimerizing through the formation of supramolecular hydrogen bonds, which was reflected in a 4-fold increase in Young's modulus. Through dynamic mechanical analysis and calorimetry, we further confirmed that the degree of hydrogen bonding in the LCNs could be judiciously designed to fine-tune the mechanical properties and glass transition temperature. These findings demonstrate the untapped potential of biochemical mechanisms as molecular triggers in LCNs and open the door to the use of nucleophilic chemistries in modulating the mechanical properties of LCNs.

Understanding Design Rules for Optimizing the Interface between Immobilized Enzymes and Random Copolymer Brushes.

A long-standing goal in the field of biotechnology is to develop and understand design rules for the stabilization of enzymes upon immobilization to materials. While immobilization has sometimes been successful as a strategy to stabilize enzymes, the design of synthetic materials that stabilize enzymes remains largely empirical. We sought to overcome this challenge by investigating the mechanistic basis for the stabilization of immobilized lipases on random copolymer brush surfaces comprised of poly(ethylene glycol) methacrylate (PEGMA) and sulfobetaine methacrylate (SBMA), which represent novel heterogeneous supports for immobilized enzymes. Using several related but structurally diverse lipases, including Bacillus subtilis lipase A (LipA), Rhizomucor miehei lipase, Candida rugosa lipase, and Candida antarctica lipase B (CALB), we showed that the stability of each lipase at elevated temperatures was strongly dependent on the fraction of PEGMA in the brush layer. This dependence was explained by developing and applying a new algorithm to quantify protein surface hydrophobicity, which involved using unsupervised cluster analysis to identify clusters of hydrophobic atoms. Characterization of the lipases showed that the optimal brush composition correlated with the free energy of solvation per enzyme surface area, which ranged from -17.1 kJ/mol·nm2 for LipA to -11.8 kJ/mol·nm2 for CALB. Additionally, using this algorithm, we found that hydrophobic patches consisting of aliphatic residues had a higher free energy than patches consisting of aromatic residues. By providing the basis for rationally tuning the interface between enzymes and materials, this understanding will transform the use of materials to reliably ruggedize enzymes under extreme conditions.

Faster Surface Ligation Reactions Improve Immobilized Enzyme Structure and Activity.

During integration into materials, the inactivation of enzymes as a result of their interaction with nanometer size denaturing "hotspots" on surfaces represents a critical challenge. This challenge, which has received far less attention than improving the long-term stability of enzymes, may be overcome by limiting the exploration of surfaces by enzymes. One way this may be accomplished is through increasing the rate constant of the surface ligation reaction and thus the probability of immobilization with reactive surface sites (i.e., ligation efficiency). Here, the connection between ligation reaction efficiency and the retention of enzyme structure and activity was investigated by leveraging the extremely fast reaction of strained trans-cyclooctene (sTCOs) and tetrazines (Tet). Remarkably, upon immobilization via Tet-sTCO chemistry, carbonic anhydrase (CA) retained 77% of its solution-phase activity, while immobilization via less efficient reaction chemistries, such as thiol-maleimide and azide-dibenzocyclooctyne, led to activity retention of only 46% and 27%, respectively. Dynamic single-molecule fluorescence tracking methods further revealed that longer surface search distances prior to immobilization (>0.5 µm) dramatically increased the probability of CA unfolding. Notably, the CA distance to immobilization was significantly reduced through the use of Tet-sTCO chemistry, which correlated with the increased retention of structure and activity of immobilized CA compared to the use of slower ligation chemistries. These findings provide an unprecedented insight into the role of ligation reaction efficiency in mediating the exploration of denaturing hotspots on surfaces by enzymes, which, in turn, may have major ramifications in the creation of functional biohybrid materials.

Rosetta-Enabled Structural Prediction of Permissive Loop Insertion Sites in Proteins.

While loop motifs frequently play a major role in protein function, our understanding of how to rationally engineer proteins with novel loop domains remains limited. In the absence of rational approaches, the incorporation of loop domains often destabilizes proteins, thereby requiring massive screening and selection to identify sites that can accommodate loop insertion. We developed a computational strategy for rapidly scanning the entire structure of a scaffold protein to determine the impact of loop insertion at all possible amino acid positions. This approach is based on the Rosetta kinematic loop modeling protocol and was demonstrated by identifying sites in lipase that were permissive to insertion of the LAP peptide. Interestingly, the identification of permissive sites was dependent on the contribution of the residues in the near-loop environment on the Rosetta score and did not correlate with conventional structural features (e.g., B-factors). As evidence of this, several insertion sites (e.g., following residues 17, 47-49, and 108), which were predicted and confirmed to be permissive, interrupted helices, while others (e.g., following residues 43, 67, 116, 119, and 121), which are situated in loop regions, were nonpermissive. This approach was further shown to be predictive for ß-glucosidase and human phosphatase and tensin homologue (PTEN), and to facilitate the engineering of insertion sites through in silico mutagenesis. By enabling the design of loop-containing protein libraries with high probabilities of soluble expression, this approach has broad implications in many areas of protein engineering, including antibody design, improving enzyme activity, and protein modification.

Mixed Phospholipid Vesicles Catalytically Inhibit and Reverse Amyloid Fibril Formation.

While many approaches to reduce fibrillation of amyloid-ß (Aß) have been aimed at slowing fibril formation, the degradation of fibrils remains challenging. We provide insight into fibril degradation as well as the inhibition of fiber formation by lipid vesicles composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine and 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol). In the presence of vesicles with the optimal lipid composition, fibril formation was inhibited up to 76%. Additionally, by tuning the lipid composition, mature fibril content decreased up to 74% and the ß-sheet content of Aß was significantly reduced. The reduction in fibril and ß-sheet content was consistent with a decrease in fibril diameter and could be attributed to the chaperone-like activity of the mixed vesicles. While demonstrating this remarkable activity, our findings present new evidence that lipid composition has a significant effect on the strength of the interaction between lipid bilayers and Aß peptides/fibrils. This understanding has intriguing therapeutic implications in treating protein misfolding diseases.

Polyelectrolyte Multilayers Enhance the Dry Storage and pH Stability of Physically Entrapped Enzymes.

Polyelectrolyte multilayers (PEMs) are attractive materials for immobilizing enzymes due to their unique ionic environment, which can prevent unfolding. Here, we demonstrated that the stability to dry storage and elevated pH were significantly enhanced when negatively charged nitroreductase (NfsB) was embedded in a PEM by depositing alternating layers of the enzyme and polycation (PC) onto porous silica particles. The PC strength (i.e., pKa) and the surface charge of the film were varied to probe the effects that internal and surface chemistry had on the pH stability of the entrapped NfsB. All films showed enhanced activity retention at elevated pH (>6), and inactivation at reduced pH (<6) similar to NfsB in solution, indicating that the primary stabilizing effect of immobilization was achieved through ionic interactions between NfsB and the PC and not through changes to the surface charge of the NfsB. Additionally, films that were stored dry at 4 °C for 1 month retained full activity, while those stored at room temperature lost 30% activity. Remarkably, at 50 °C, above the NfsB melting temperature, 40% activity was retained after 1 month of dry storage. Our results suggest that internal film properties are significantly more important than surface charge, which had minor effects on activity. Specifically, immobilization with the weak PC, poly(l-lysine), increased the optimal pH and the activity of immobilized NfsB (which we attribute to greater permeability), relative to immobilization with the strong PC, poly(diallyldimethylammonium chloride). However, NfsB was leached from the PLL film to a greater extent. Overall, these observations demonstrate that internal ionic cross-linking is key to the stabilizing effects of PEMs and that the pH response can be tuned by controlling the number of cross-links (e.g., by changing the strength of the PC). However, this may be at the cost of reduced loading, illustrating the necessity of simultaneously optimizing enzyme loading, internal ionic cross-linking, and substrate transport.

Determinants for Efficient Editing with Cas9-Mediated Recombineering in Escherichia coli.

In E. coli, editing efficiency with Cas9-mediated recombineering varies across targets due to differences in the level of Cas9:gRNA-mediated DNA double-strand break (DSB)-induced cell death. We found that editing efficiency with the same gRNA and repair template can also change with target position, cas9 promoter strength, and growth conditions. Incomplete editing, off-target activity, nontargeted mutations, and failure to cleave target DNA even if Cas9 is bound also compromise editing efficiency. These effects on editing efficiency were gRNA-specific. We propose that differences in the efficiency of Cas9:gRNA-mediated DNA DSBs, as well as possible differences in binding of Cas9:gRNA complexes to their target sites, account for the observed variations in editing efficiency between gRNAs. We show that editing behavior using the same gRNA can be modified by mutating the gRNA spacer, which changes the DNA DSB activity. Finally, we discuss how variable editing with different gRNAs could limit high-throughput applications and provide strategies to overcome these limitations.

CRISPR/Cas9 recombineering-mediated deep mutational scanning of essential genes in Escherichia coli.

Deep mutational scanning can provide significant insights into the function of essential genes in bacteria. Here, we developed a high-throughput method for mutating essential genes of Escherichia coli in their native genetic context. We used Cas9-mediated recombineering to introduce a library of mutations, created by error-prone PCR, within a gene fragment on the genome using a single gRNA pre-validated for high efficiency. Tracking mutation frequency through deep sequencing revealed biases in the position and the number of the introduced mutations. We overcame these biases by increasing the homology arm length and blocking mismatch repair to achieve a mutation efficiency of 85% for non-essential genes and 55% for essential genes. These experiments also improved our understanding of poorly characterized recombineering process using dsDNA donors with single nucleotide changes. Finally, we applied our technology to target rpoB, the beta subunit of RNA polymerase, to study resistance against rifampicin. In a single experiment, we validate multiple biochemical and clinical observations made in the previous decades and provide insights into resistance compensation with the study of double mutants.

Reduced Enzyme Dynamics upon Multipoint Covalent Immobilization Leads to Stability-Activity Trade-off.

The successful incorporation of enzymes into materials through multipoint covalent immobilization (MPCI) has served as the foundation for numerous advances in diverse fields, including biocatalysis, biosensing, and chemical weapons defense. Despite this success, a mechanistic understanding of the impact of this approach on enzyme stability has remained elusive, which is critical for realizing the full potential of MPCI. Here, we showed that the stabilization of lipase upon MPCI to polymer brush surfaces resulted from the rigidification of the enzyme with an increase in the number of enzyme-brush attachments. This was evident by a 10-fold decrease in the rates of enzyme unfolding and refolding as well as a reduction of the intrinsic fluctuations of the folded and unfolded states, which was measured by single-molecule (SM) Förster Resonance Energy Transfer imaging. Moreover, our results illuminate an important trade-off between stability and activity as a function of this decrease in structural dynamics of the immobilized lipase. Notably, as the thermal stability of lipase increased, as indicated by the temperature optimum for activity of the enzyme, the specific activity of lipase decreased. This decrease in activity was attributed to a reduction in the essential motions of the folded state that are required for catalytic turnover of substrate. These results provide direct evidence of this effect, which has long been a matter of speculation. Furthermore, our findings suggest that the retention of activity and stabilization of an enzyme may be balanced by tuning the extent of enzyme attachment.

Protein adsorption measurements on low fouling and ultralow fouling surfaces: A critical comparison of surface characterization techniques.

Ultralow protein fouling behavior is a common target for new high-performance materials. Ultralow fouling is often defined based on the amount of irreversibly adsorbed protein (< 5 ng cm-2) measured by a surface ensemble averaging method. However, protein adsorption at solid interfaces is a dynamic process involving multiple steps, which may include adsorption, desorption, and irreversible protein denaturation. In order to better optimize the performance of antifouling surfaces, it is imperative to fully understand how proteins interact with surfaces, including kinetics of adsorption and desorption, conformation, stability, and amount of adsorbed proteins. Defining ultralow fouling surfaces based on a measurement at or near the limit of detection of a surface-averaged measurement may not capture all of this behavior. Single-molecule microscopy techniques can resolve individual protein-surface interactions with high temporal and spatial resolution. This information can be used to tune the properties of surfaces to better resist protein adsorption. In this work, we demonstrate how combining surface plasmon resonance, X-ray photoelectron spectroscopy, atomic force microscopy, and single-molecule localization microscopy provides a more complete picture of protein adsorption on low fouling and ultralow fouling polyelectrolyte multilayer and polymer brush surfaces, over different regimes of protein concentration. In this case, comparing the surfaces using surface plasmon resonance alone is insufficient to rank their resistance to protein adsorption. Our results suggest a revision of the accepted definition of ultralow fouling surfaces is timely: with the advent of time-resolved studies of protein adsorption kinetics at the single-molecule level, it is neither necessary nor sufficient to rely on a surface averaging techniques to qualify ultralow fouling surfaces. Since protein adsorption is a dynamic process, understanding how surface properties affect the kinetics of protein adsorption will enable the design of future generations of advanced antifouling materials. STATEMENT OF SIGNIFICANCE: The design of ultralow fouling surfaces is often optimized based on a single surface-averaging technique measuring the amount of irreversibly adsorbed protein. This work provides a critical comparison of alternative techniques for evaluating protein adsorption on low fouling and ultralow fouling surfaces, and demonstrates how additional information about the dynamics of protein-surface interactions at the interface can be obtained by application of single-molecule microscopy. This approach could be used to better elucidate mechanisms of protein resistance and design principles for advanced ultralow fouling materials.

Lipoic Acid Ligase-Promoted Bioorthogonal Protein Modification and Immobilization.

Protein bioconjugation benefits from precise regional and temporal control. One notable way of achieving this control is through the enzymatic attachment of bioorthogonal reactive handles to peptide recognition sequences that are genetically fused to target proteins of interest. The lipoic acid ligase variant, LplAW37V, functionalizes proteins by covalently attaching an azide-bearing lipoic acid derivative to a 13-amino acid recognition sequence known as the lipoic acid ligase acceptor peptide (LAP). Once attached, the azide group can be modified with diverse chemical entities through azide-alkyne click chemistry, enabling conjugation of chemical probes such as fluorophores and facilitating polymer attachment, glycosylation, and protein immobilization in addition to many other possible chemical modifications. The versatility of the attached azide group is complemented by the modular nature of the LAP sequence, which can be introduced within a protein at internal and/or terminal sites as well as at multiple sites simultaneously. In this chapter we describe the in vitro LplAW37V-mediated ligation of 10-azidodecanoic acid to a LAP-containing target protein (i.e., green fluorescent protein (GFP)) and the characterization of the ligation reaction products. Additionally, methods for the modification and immobilization of azide-functionalized LAP-GFP are discussed.

Surface-Templated Nanobubbles Protect Proteins from Surface-Mediated Denaturation.

In this Letter, we report that surface-bound nanobubbles reduce protein denaturation on methylated glass by irreversible protein shell formation. Single-molecule total internal reflection fluorescence (SM-TIRF) microscopy was combined with intramolecular Förster resonance energy transfer (FRET) to study the conformational dynamics of nitroreductase (NfsB) on nanobubble-laden methylated glass surfaces, using reflection brightfield microscopy to register nanobubble locations with NfsB adsorption. First, NfsB adsorbed irreversibly to nanobubbles with no apparent desorption after 5 h. Moreover, virtually all (96%) of the NfsB molecules that interacted with nanobubbles remained folded, whereas less than 50% of NfsB molecules remained folded in the absence of nanobubbles on unmodified silica or methylated glass surfaces. This trend was confirmed by ensemble-average fluorometer TIRF experiments. We hypothesize that nanobubbles reduce protein damage by passivating strongly denaturing topographical surface defects. Thus, nanobubble stabilization on surfaces may have important implications for antifouling surfaces and improving therapeutic protein storage.